Current-induced Magnetization Switching Research Articles

Spin-Orbit Torque Vector Quantification in Nanoscale Magnetic Tunnel Junctions.

Spin-orbit torques (SOT) allow ultrafast, energy-efficient toggling of magnetization state by an in-plane charge current for applications such as magnetic random-access memory (SOT-MRAM). Tailoring the SOT vector comprising of antidamping (TAD) and fieldlike (TFL) torques could lead to faster, more reliable, and low-power SOT-MRAM. Here, we establish a method to quantify the longitudinal (TAD) and transverse (TFL) components of the SOT vector and its efficiency χAD and χFL, respectively, in nanoscale three-terminal SOT magnetic tunnel junctions (SOT-MTJ). Modulation of nucleation or switching field (BSF) for magnetization reversal by SOT effective fields (BSOT) leads to the modification of SOT-MTJ hysteresis loop behavior from which χAD and χFL are quantified. Surprisingly, in nanoscale W/CoFeB SOT-MTJ, we find χFL to be (i) twice as large as χAD and (ii) 6 times as large as χFL in micrometer-sized W/CoFeB Hall-bar devices. Our quantification is supported by micromagnetic and macrospin simulations which reproduce experimental SOT-MTJ Stoner-Wohlfarth astroid behavior only for χFL > χAD. Additionally, from the threshold current for current-induced magnetization switching with a transverse magnetic field, we show that in SOT-MTJ, TFL plays a more prominent role in magnetization dynamics than TAD. Due to SOT-MRAM geometry and nanodimensionality, the potential role of nonlocal spin Hall spin current accumulated adjacent to the SOT-MTJ in the mediation of TFL and χFL amplification merits to be explored.

Influence of ferromagnetic interlayer exchange coupling on current-induced magnetization switching and Dzyaloshinskii-Moriya interaction in Co/Pt/Co multilayer system.

This paper investigates the relationship among interlayer exchange coupling (IEC), Dzyaloshinskii-Moriya interaction (DMI), and multilevel magnetization switching within a Co/Pt/Co heterostructure, where varying Pt thicknesses enable control over the coupling strength. Employing Brillouin Light Scattering to quantify the effective DMI, we explore its potential role in magnetization dynamics and multilevel magnetization switching. Experimental findings show four distinct resistance states under an external magnetic field and spin Hall effect related spin current. We explain this phenomenon based on the asymmetry between Pt/Co and Co/Pt interfaces and the interlayer coupling, which, in turn, influences the DMI and subsequently impacts the magnetization dynamics. Numerical simulations, including macrospin, 1D domain wall, and simple spin wave models, further support the experimental observations of multilevel switching and help uncover the underlying mechanisms. Our proposed explanation, supported by magnetic domain observation using polar-magnetooptical Kerr microscopy, offers insights into both the spatial distribution of magnetization and its dynamics for different IECs, thereby shedding light on its interplay with DMI, which may lead to potential applications in storage devices.

Perpendicular magnetic anisotropy in permalloy ultrathin film grown on RuO2(101) surface

Permalloy (Py) films are commonly regarded as soft magnetic materials, wherein the magnetization aligns within the film plane. Our studies reveal the presence of perpendicular magnetic anisotropy in Py thin films deposited on the collinear antiferromagnetic RuO2(101) surface. By employing both the magneto-optical Kerr effect and the anomalous Hall effect, we identified the interfacial origin of the observed perpendicular anisotropy, quantifying it with an interfacial anisotropy energy of approximately 0.77 erg/cm2. Current-induced magnetization switching in Py/RuO2(101) has been achieved under an in-plane field, with the current applied along both [010] and [10 1¯] directions. Py films exhibiting perpendicular magnetic anisotropy offer an innovative material platform for investigating the spin–orbit effect, holding significant potential for spintronics applications.

Nonlinear optical diode effect in a magnetic Weyl semimetal

Diode effects are of great interest for both fundamental physics and modern technologies. Electrical diode effects (nonreciprocal transport) have been observed in Weyl systems. Optical diode effects arising from the Weyl fermions have been theoretically considered but not probed experimentally. Here, we report the observation of a nonlinear optical diode effect (NODE) in the magnetic Weyl semimetal CeAlSi, where the magnetization introduces a pronounced directionality in the nonlinear optical second-harmonic generation (SHG). We demonstrate a six-fold change of the measured SHG intensity between opposite propagation directions over a bandwidth exceeding 250 meV. Supported by density-functional theory, we establish the linearly dispersive bands emerging from Weyl nodes as the origin of this broadband effect. We further demonstrate current-induced magnetization switching and thus electrical control of the NODE. Our results advance ongoing research to identify novel nonlinear optical/transport phenomena in magnetic topological materials and further opens new pathways for the unidirectional manipulation of light.

Interfacial Modulation of Spin-Orbit Torques Induced by Two-Dimensional van der Waals Material ZrSe3.

Two-dimensional van der Waals (2D vdW) materials are widely used in spin-orbit torque (SOT) devices. Recent studies have demonstrated the low crystal symmetry and large spin Hall conductivity of 2D vdW ZrSe3, indicating its potential applications in low-power SOT devices. Here, we study the interfacial contribution of SOTs and current-induced magnetization switching in the ZrSe3/Py (Ni80Fe20) and ZrSe3/Cu/Py heterostructures. SOT efficiencies of samples are detected by the spin-torque ferromagnetic resonance (ST-FMR), and out-of-plane damping-like torque (τB) is observed. The ratio between τB and the field-like torque (τA) decreases from 0.175 to 0.138 when inserting 1 nm Cu at the interface and then drops to 0.001 when the thickness of Cu intercalation is 2 nm, indicating that Cu intercalation inhibits the τB component of SOT. Moreover, the SOT efficiency is increased from 3.05 to 5.21, which may be attributed to the Cu intercalation being beneficial to improve the interface between Py and ZrSe3. Theoretical calculation has shown that the Cu spacer can change the conductivity of ZrSe3 from semiconductor to conductor, thereby decreasing the Schottky barrier and increasing the transmission efficiency of the spin current. Furthermore, magneto-optical Kerr effect (MOKE) microscopy is employed to verify the current-driven magnetization switching in these structures. In comparison to the ZrSe3/Py bilayer, the critical current density of ZrSe3/Cu/Py is reduced when inserting 1 nm Cu, demonstrating the higher SOT efficiency and lower power consumption in ZrSe3/Cu/Py structures.

Estimation of the interfacial Dzyaloshinskii–Moriya interaction in all-metallic multilayer with perpendicular magnetic anisotropy

The interfacial Dzyaloshinskii–Moriya (iDMI) interaction which arises at the interface between a heavy metal (HM) and a ferromagnet (FM) can stabilize chiral Néel type domain walls in ultrathin perpendicularly magnetized multilayers. Dissimilar HMs are required on both bottom and top sides of the FM layer in order to introduce the structural inversion asymmetry which ensures an effective iDMI in the FM layer. HMs like Pt, Ir, Ta etc are very well known for developing large iDMI in the interface with Co, whereas noble metals like Au can produce negligible iDMI. Therefore, a multilayer Pt/Co/Au is chosen to determine the individual iDMI in the Pt/Co interface. Some procedures like field-induced domain wall motion study, spin–orbit torque efficiency estimation study are well established to quantify the effective field due to the iDMI ( HDMI ) which in turn gives the strength of the iDMI ( Deff ). Besides these procedures, a current-induced switching of magnetization was studied to construct a switching phase diagram where the critical current density of magnetization switching has been plotted as a function of the applied in-plane magnetic field. The experimentally constructed diagram and the simulated diagram using a micromagnetic study have revealed the possibility to quantify HDMI . Thus, a systematic and unified estimation of Deff has been done on all-metallic Ta/Pt/Co/Au multilayers.

Magnon-mediated spin Hall magnetoresistance and unidirectional magnetoresistance in Pt/NiO/NiFe structures

Spin–orbit torque provides an efficient strategy for electric manipulation of magnetization. However, Joule heat accompanying with electron motion in the electron-mediated spin current result in unavoidable power dissipation. Moreover, the spin diffusion length in electron-mediated spin current is relatively short, preventing the transmission of spin information over long distances. Magnon-mediated spin current, without moving electrons, can be an excellent alternative to the conventional spin current. Magnon-mediated transfer torque effect has been reported in several previous works. Here, we report the magnon-mediated spin Hall magnetoresistance (SMR) and unidirectional magnetoresistance (UMR) in Pt/NiO/NiFe structures. The significant SMR and UMR were observed in the samples with the NiO thickness up to 60 nm, demonstrating the efficient transmission of magnon-mediated spin current over long distances in the NiO layer. In addition, we observed current-induced in-plane magnetization switching in the NiFe layer via the UMR measurement. These results demonstrated the possibility for developing the efficient spintronic devices operated by magnons.

Direct Observation of Room-Temperature Magnetic Skyrmion Motion Driven by Ultra-Low Current Density in Van Der Waals Ferromagnets.

The recent discovery of room-temperature ferromagnetism in 2D van der Waals (vdW) materials, such as Fe3 GaTe2 (FGaT), has garnered significant interest in offering a robust platform for 2D spintronic applications. Various fundamental operations essential for the realization of 2D spintronics devices are experimentally confirmed using these materials at room temperature, such as current-induced magnetization switching or tunneling magnetoresistance. Nevertheless, the potential applications of magnetic skyrmions in FGaT systems at room temperature remain unexplored. In this work, the current-induced generation of magnetic skyrmions in FGaT flakes employing high-resolution magnetic transmission soft X-ray microscopy is introduced, supported by a feasible mechanism based on thermal effects. Furthermore, direct observation of the current-induced magnetic skyrmion motion at room temperature in FGaT flakes is presented with ultra-low threshold current density. This work highlights the potential of FGaT as a foundation for room-temperature-operating 2D skyrmion device applications.

Field-free spin–orbit torque-induced switching of perpendicular magnetization at room temperature in WTe2/ferromagnet heterostructures

Spin–orbit torque provides an efficient way to achieve switching of perpendicular magnetization, which is essential for designing energy-efficient spintronic devices. An in-plane antidamping torque combined with an out-of-plane antidamping torque can often deterministically switch perpendicular magnetization without an external magnetic field. Encouragingly, field-free perpendicular magnetization switching of a two-dimensional (2D) material WTe2/ferromagnet bilayer has been reported recently, but the working temperature (< 200 K) is quite below room temperature. Here, we demonstrate field-free perpendicular magnetization switching in the Pt/Co/Pt/WTe2 multilayer films at room temperature, which is mainly attributed to the out-of-plane antidamping torque originating from the WTe2 layer. In addition, current-induced perpendicular magnetization switching at zero magnetic field is also accomplished in the [Co/Pt]2/WTe2 multilayer film with a very large perpendicular magnetic anisotropic field (∼13 600 Oe), which is very useful for practical applications. This work offers a potential way to develop spintronic devices based on 2D materials at room temperature.

Enhanced current-induced magnetization switching via antiferromagnetic coupled interface in Co/Ho heterostructures

Rare-earth ferromagnetic (RE–FM) heterostructures have attracted significant attention due to their intricate spin structures and physical phenomena. The antiferromagnetic coupled (AFC) interface formed by the distinctive interaction between the FM and RE elements has critical contributions to the magnetization reversal process. In this work, we investigate the enhancement of current-induced magnetization switching with the AFC interface at the Co/Ho heterostructure. The results shows that an increased spin–orbit torque (SOT) efficiency of up to 250% was achieved at a Ho thickness of 7 nm, with a critical switching current density of 2.7 × 1010 A/m2. When a Cu interlayer was introduced between the Co/Ho interface, a decreased SOT efficiency was observed, indicating that the SOT enhancement is primarily attributed to the AFC interfacial effect. At the AFC interface, the interaction between Co and Ho atoms generates an additional torque, enhancing the effective SOT efficiency.

Field-free magnetization switching through modulation of zero-field spin–orbit torque efficacy

To make spin–orbit torque magnetic random access memory (SOT-MRAM) practical, current-induced magnetization switching without an external bias field is essential. Given that the CoFeB/MgO structure has already been used in typical spin-transfer torque-MRAM for its high tunneling magnetoresistance, leveraging a similar material system to achieve field-free SOT switching is of great importance. In this work, we systematically investigate the field-free switching mechanism in CoFeB/W/CoFeB T-type structures, where the two CoFeB layers are in-plane and perpendicularly magnetized, respectively. Initial SOT characterization shows a sizable zero-field SOT efficacy (χHx=0) for such T-type devices. Furthermore, field-free angle-dependent SOT measurement confirms the parallel relationship between the built-in bias field and the magnetization of the in-plane magnetized CoFeB. Based on thorough verification and exclusion of other potential mechanisms, the Néel orange-peel effect emerges as the dominant origin for such a built-in bias field, where a positive correlation between the deposited film surface roughness and χHx=0 is found. Based on this discovery, the field-free switching efficacy in T-type structures is further optimized via film roughness tuning and examined with pillar-shaped devices. Our results provide insights into the tentative approach to improve field-free switching using T-type devices and the feasibility of downscaling.

Reducing switching current with Gilbert damping constant in nanomagnets with perpendicular anisotropy under Dzyaloshinskii–Moriya interaction

We report current-induced magnetization switching (j sw) with a nanosecond-duration pulse current (t p) in a perpendicularly magnetized nanomagnet under the Dzyaloshinskii–Moriya interaction (DMI) and investigate the effect of the Gilbert damping constant (α), t p, and DMI value (D) on j sw via micromagnetic simulations. When α is sufficiently small at t p = 1 ns, j sw for D = 1.0 erg cm−2 decreases by 42% compared to that for D = 0 erg cm−2. Further, j sw can be reduced under the DMI when α is small and t p is short, which is attributed to the twisted magnetization and increased initial magnetization angle.

Fabrication of highly oriented Mn4N/Pt epitaxial bilayer structure on MgO(001) for spintronics applications

Magnetization control by electric current or spin current is an attractive technology with potential applications in memory and logic devices, and Mn4N has attracted much attention in recent years as a candidate material for current-induced magnetization switching and magnetic domain wall motion, as well as a skyrmion material. For these applications, a bilayer structure of Mn4N and heavy metals must be formed with high crystalline quality. In this study, we have achieved the epitaxial growth of Mn4N thin films on MgO(001) with a Pt underlayer. The reflection high-energy electron diffraction images and x-ray diffraction ω-rocking curves show that the Mn4N films fabricated on the Pt underlayers exhibit higher crystalline quality than the Mn4N films directly formed on the MgO. Furthermore, anomalous Hall effect loops with bump-like structures were observed. This is considered to be due to the topological spin texture. The Mn4N/Pt epitaxial bilayer structure has potential for use in spin–orbit torque applications and is a candidate configuration for topological spin textures.

Nonuniform Current-Driven Formation and Displacement of the Magnetic Compensation Point in Variable-Width Nanoscale Ferrimagnets.

Nano- and microstructures based on ferrimagnets can demonstrate high efficiency and dynamics of current-induced magnetization switching combined with high stability of spin textures such as bubble domains and skyrmions, which are of practical importance for the development of spintronics and spin-orbitronics. This set of features is usually associated with magnetic momentum or angular momentum compensation states. Here, we experimentally show that the compensation state can be realized locally using nonuniform Joule heating. This effect is observed in the variable-width current guide made of the ferrimagnetic W/Co76Tb24/Ru thin films, where the position of a region heated to the compensation temperature depends linearly on the current pulse amplitude. This approach makes it possible to observe the simultaneous coexistence of Co-dominant and Tb-dominant regions, where current pulses induce spin-orbit torques in opposite directions, leading to local magnetization switching. It is found that the position of a Néel domain wall constraining the switched region lies in the vicinity of the coordinate corresponding to the compensation point but does not coincide with it due to high mobility under the action of spin current. Our findings open an alternative approach for engineering of ferrimagnetic nanodevices with advanced properties for future applications in spintronics, spin-orbitronics, and nanoelectronics.

Ultra-thin lithium aluminate spinel ferrite films with perpendicular magnetic anisotropy and low damping

Ultra-thin films of low damping ferromagnetic insulators with perpendicular magnetic anisotropy have been identified as critical to advancing spin-based electronics by significantly reducing the threshold for current-induced magnetization switching while enabling new types of hybrid structures or devices. Here, we have developed a new class of ultra-thin spinel structure Li0.5Al1.0Fe1.5O4 (LAFO) films on MgGa2O4 (MGO) substrates with: 1) perpendicular magnetic anisotropy; 2) low magnetic damping and 3) the absence of degraded or magnetic dead layers. These films have been integrated with epitaxial Pt spin source layers to demonstrate record low magnetization switching currents and high spin-orbit torque efficiencies. These LAFO films on MGO thus combine all of the desirable properties of ferromagnetic insulators with perpendicular magnetic anisotropy, opening new possibilities for spin based electronics.

Spin–orbit torque in perpendicularly magnetized [Pt/Ni] multilayers

The performance of spin–orbit torque (SOT) in heavy metal/ferromagnetic metal periodic multilayers has attracted widespread attention. In this paper, we have successfully fabricated a series of perpendicular magnetized [Pt(2–t)/Ni(t)]4 multilayers, and studied the SOT in the multilayers by varying the thickness of Ni layer t. The current induced magnetization switching was achieved with a critical current density of 1 × 107 A/cm2. The damping-like SOT efficiency ξ DL was extracted from an extended harmonic Hall measurement. We demonstrated that the ξ DL can be effectively modulated by t Pt/t Ni ratio of Pt and Ni in the multilayers. The SOT investigation about the [Pt/Ni] N multilayers might provide new material candidates for practical perpendicular SOT-MRAM devices.

Giant Orbital-to-Spin Conversion for Efficient Current-Induced Magnetization Switching of Ferrimagnetic Insulator.

It has long been believed that the attachment of two heavy metals such as Ta and Pt with opposite spin Hall angles results in a weakened net torque generation efficiency in magnetization switching devices. Here, we report a giant orbital-to-spin conversion in Ta/Pt/Tm3Fe5O12 (TmIG) heterostructures. We show that the torque generation efficiency is enhanced by an order of magnitude in the Ta/Pt/TmIG trilayer compared to that in the Pt/TmIG bilayer. This enhancement is further evidenced by the fact that the critical current density for the magnetization switching of the Ta/Pt/TmIG is an order of magnitude smaller than that of the Pt/TmIG. It is found that the orbital current generated from Ta through the orbital Hall effect (OHE) is converted to the spin current in the interior of Pt. Our discovery offers an extraordinary approach to enhance the torque generation for magnetization switching of insulators and provides an important piece of information for orbitronics.

Field-free spin-orbit torque switching in interlayer exchange coupled Co/Ta/CoTb

This study investigates a T-type field-free spin-orbit torque device with an in-plane magnetic layer coupled to a perpendicular magnetic layer via a non-magnetic spacer. The device utilizes a Co/Ta/CoTb structure, in which the in-plane Co layer and the perpendicular CoTb layer are ferromagnetically (FM) coupled through the Ta spacer. ‘T-type’ refers to the magnetization arrangement in the FM/spacer/FIM structure, where the magnetization in FM is in-plane, while in FIM, it is out-of-plane. This configuration forms a T-shaped arrangement for the magnetization of the two magnetic layers. Additionally, ‘interlayer exchange coupling (IEC)’ denotes the interaction between the two magnetic layers, which is achieved by adjusting the material and thickness of the spacer. Our results show that an in-plane effective field from the IEC enables deterministic current-induced magnetization switching of the CoTb layer. The field-driven and the current-driven asymmetric domain wall motion are observed and characterized by magneto-optic Kerr effect measurements. The functionality of multistate synaptic plasticity is demonstrated by understanding the relationship between the anomalous Hall resistance and the applied current pulses, indicating the potential for the device in spintronic memory and neuromorphic computing.

Symmetry breaking for current-induced magnetization switching

Electromagnetic phenomena, such as magnetization switching, are guided by parity and time-reversal symmetries. Magnetic field and magnetization are time-odd axial vectors. Therefore, the magnetic field can switch magnetization reversibly. In contrast, the electric field is a time-even polar vector that cannot directly switch magnetization. For magnetic recording, an electrical coil-generated local magnetic field is used to switch the magnetic bit. However, in order to integrate the magnetic functionality, e.g., nonvolatile magnetic memory with high speed and low energy consumption, into the chip, it is essential to implement the magnetization switching by an electrical current, where the current induces other axial vectors through spin-transfer torque or spin–orbit torque (SOT). As an energy-efficient tool of magnetization switching, current-induced SOT has been intensively studied for the past decade, which holds great promise in the next generation of magnetic memories and magnetic logic devices [A. Manchon et al., Rev. Mod. Phys. 91, 035004 (2019); X. Han et al., Appl. Phys. Lett. 118, 120502 (2021); C. Song et al., Prog. Mater. Sci. 118, 100761 (2021); Q. Shao et al., IEEE Trans. Magn. 57, 21076639 (2021); J. Ryu et al., Adv. Mater. 32, 1907148 (2020); Y. Cao et al., iScience 23, 101614 (2020)]. In this review, we will first give the basic principle of the symmetry considerations for current-induced magnetization switching. Then, different methods to break the mirror symmetry for deterministic SOT switching will be discussed, together with examples that contain recent progress. In the end, we will give a discussion on the challenges and perspectives of the symmetry designs for SOT, which aim to inspire future fundamental studies and device applications.

Field-Free Magnetization Switching in A1 CoPt Single-Layer Nanostructures for Neuromorphic Computing

Current-induced field-free magnetization switching in single-layer films has been widely investigated for the application of spin–orbit torque (SOT) drivers in low-power, high-density, and nano-sized memory. In this paper, we report field-free SOT switching with threefold angle dependence in A1 disordered single-layer CoPt using the MgO (111) substrate. It is found that the magnetization could not switch in the absence of an external in-plane magnetic field when the current was flowing in the direction of the mirror symmetry high-symmetry axis ([11–2]). While along the direction of the low-symmetry axis ([1–10]) which destroyed the mirror symmetry to the greatest extent, field-free switching could be performed, and the switching ratio was up to 30%. This was mainly attributed to the composition gradient-induced in-plane inversion asymmetry and the low symmetry at the interface of Co/Pt broken out-of-plane inversion. Furthermore, CoPt devices with nanoscale thickness exhibited stable multistate magnetic switching behavior without an external magnetic field, and simultaneously nonlinear synaptic characteristics were obtained. A neural network was established, in which the synaptic weights between the hidden layer and the output layer are updated by using the resistance state of SOT synaptic devices, and the network could achieve about 90.54% recognition accuracy when applied to MNIST’s handwritten digital dataset. This work confirmed that a field-free SOT switch could be realized in single-layer CoPt, which provided theoretical guidance and data support for spin devices.